Light Symphony
Controller Model No. HLC01

 The Light Symphony controller is the hub of the system and should be installed indoors. The power for the garden lighting is routed through the controller allowing it to filter noise from the supply and take control of the lighting. The controller can individually control up to 112 lights to a total load of 2.8KW. Higher power ratings can be achieved using the optional external mains filter.

 All day-to-day functions are available from the easy to use remote control supplied with the unit. The remote handset allows individual control of any light connected to the system, the ability to store and recall up to 16 pre-defined moods / groups or run a predefined ‘light show’. The radio remote control does not need line-of-sight and has range of up to 30m, which can be extended with an external aerial to over 100m.

 The controller includes six simple to use 24-hour timers for pre-setting lights or groups of lights to come on/off automatically. The internal clock is easy to set and battery backed up.

 The controller includes eight predefined ‘light shows’ but also allows a custom light show to be created and stored. The ‘light show’ allows all, or a group of lights, to gently blend up and down in a relaxing pattern. Combined with coloured lamps this can add spectacular effects to any garden.

 The controller includes two external inputs which may be used in a variety of ways to automatically trigger groups of lights; external light switch, door contact or security alarm trigger.

 Features ;

  • RF Remote control for simple and convenient control
  • Individual on/off and dimming control of any light
  • Individual on/off and dimming control of groups of lights
  • 6 Random ‘Light Show’ special effects to amaze your friends with
  • 100 Step user programmable ‘Light Show’
  • 6 Easy to use timers for unattended control
  • External interface for push / toggle switch or connection to alarm system
  • Batter backed up internal clock
  • Built-in mains power line filter

 Technical Specification ;

Supply Voltage    230V +10% -15%, 50Hz
Power Consumption    5W
Internal Power Filter    2800W maximum through load
Individual Control    112 lights, power permitting
Control Method    Mains-borne data carrier
Output Signal     120KHz, 8V pk/pk, into 4Ω
Output Range    >500m 1.5mm steel-wire-armoured cable
Battery Back-up    Rechargeable, Nickel Metal Hydride
Remote Control Frequency    433MHz AM Carrier
Remote Control Range    Up to 30m internal aerial, 100m external
Weight    1.5Kg
Size    240mm x 220mm x 90mm
Electrical Safety    Unit requires an earth and fused supply
  protected by a residual current breaker
EMC emission    To EN 50081 - 1
EMC immunity    To EN 50082 – 1
Electrical safety    To EN 60950 en 60065
Power-line Transmission    To EN50065 – 1
Ambient temperature    0°C to +40°C (operation)
  -20°C to +50°C (storage)
   Compliance     CE