Light Symphony Indoor Control Unit

The indoor unit is the heart of the system and its main function is to relay commands received from the wireless remote handset to the lights being controlled.

 

Click for detailed photo

A choice of two indoor units is available depending on the functionality and budget.

The table below outlines the features available in each option ;    

Light Symphony Features Controller
Model LS200		 Controller Plus+
Model HLC01
Remote Control of up to 112 individual lights  ü ü
14 ‘Scene’ memories (or Groups) ü ü
Individual level control for each light ü ü
Slow fade ‘ON’ for all lights ü ü
Lamp pre-heat for extended lamp life ü ü
Optional wireless dusk/dawn sensor ü (all lights) ü (user set)
Optional wireless motion sensor ü (all lights) ü (user set)
Factory preset ‘Light Shows’   8
100 Step user-programmable ‘Light Show’   ü
24 Hour on/off Timers   6
Time of day clock (power-fail protected)   ü
Pond Pump Remote Control On/Off 1 2
Pond Pump Timer Control   ü
Local On/Off control without remote   ü
LCD Display of time and user functions   ü
Low voltage control Light Switch, Alarm   2
Internal 10A Mains power line filter ü ü
500m+ Control signal cable range ü ü


Ideally, the power cable for the Lamp pre-heat for extended lamp life lights is routed through the indoor unit to allow the control signal to be transmitted to the garden. 

The indoor unit also contains a mains noise filter for added reliability and can easily send control signals over 500m of external cabling. Because the cable carries the signal, it is reliable and not vulnerable to external interference. 

So what do you get ?
Light Symphony controller (Plus version shown) is supplied with a remote handset, whip aerial and 1.5m mains cable. The PLUS version includes the additional features listed above, including Light Show, 6 Timers, External Control inputs, LCD display and local controls, clock and internal back-up battery.
Size:        240 x 220 x 90mm

Technical Data Sheet